Flashing Firmware / Rom via Odin.

Tutor was made because there is no tutor Flashing via Odin and many are asking how to Flashing Firmware / Rom via Odin.


* Important:

~ Make sure your computer has installed samsung usb driver
if not have a download here: http://adf * ly / DuLBF (replace "*" premises ".")
mirror: http://www.mediafire.com/?xbejb866ajsrsf1

~ Be sure to possess and use Odin Application File Version 4.43 and ancora.ops
if not have a download here:
Odin V4.43: http://adf * ly / DuLvM (replace "*" premises ".")
Ancora.ops: http://adf * ly/DuM4q (replace "*" premises ".")

mirror
odin v4.43 + ancora: http://www.mediafire.com/?51d5pj34gslaz3sancora.ops
ancora.ops (only): http://www.mediafire.com/?o1dm61288aa7ljq
md5: 325f68e218841341bb9e3a43f1e7b266

~ Make sure you do Flashing with conscious and knew the risks please Do With Your Own Risk ane not responsible if your device BRICK and other "!


Okeh enough lip service it immediately wrote to his Tutor
1. Download stock rom
Can be downloaded at sammobile.com

2. Turn off your cell phone, go into download mode by: vol down + home + power button, at the time of ignition and exit samsung writing off the power button, but still the second pressing other buttons (vol down + home button). When the on-screen ad option off both buttons and press the Vol Up.

3. Open Application Odin V4.43,
 Select the OPS button and input files ancora.ops
If Firmware / ROM download One package "check" one package (on the left in the menu option). then "Select the One Package" the existing frame on the bottom and enter the Firmware file that you have downloaded.
If Firmware / ROM download Full package does not need to "check" one package.setelah that input Firmware / ROM downloaded by:
Select the "BOOT" input file named "BOOT_xxxxx_xxxx.tar"
Select the "PHONE" input file named "MODEM_xxxxx_xxxx.tar"
Select the button "PDA" input file named "PDA_xxxxx_xxxx.tar"
Select the "CSC" input file named "CSC_xxxxx_xxxx.tar"

* Example: onePackage Flashing Firmware via ODIN








* Example: FullPackage Flashing Firmware via ODIN









4. Connect your phone to your PC / Laptop (wait until there is written com # yellow as in the picture above), start processnya and wait for it to finish. Flashing takes 5-15 minutes depending on your computer.

5. When the phone restarts, mobile will go into recovery mode and install the update dn restart

6. First boot up time range of 3-5 min.

7. Voila, unplug the usb cable from the hp you when it entered into the homescreen


FYI:
Before FLASHING, better do a FULL WIPE to follow this tutor: special who already install CWM can just follow this tutor
for who has not put cwm go into recovery mode then select wipe cache and wipe data.
Stock Firmware OnePackage: After download and extract the tar file format is 1. MD5 and 1 file format. Etc.
Stock Firmware FullPackage: Once in Download and extract the tar file format, there are 4. MD5 and 1 file format. Etc.
The difference: FullPackage used to flash clean and like new Mobile taste out of the box :), If ane usually if I flash a new ROM to FullPackage (Rom Example: ZSLA1 & ZSLD1) continues to flash again OnePackage (DXLC1, DXLM3, XXLM6, XXLM8, XXLMD). So if Flashing of FullPackage it should not be optional.

Posted in: Flashing